Gently slide the blue tab from side to side at least 5 to 6 times.Ĭ. Be sure to place the drum and toner assembly on a piece of paper in case of spilled or scattered toner.ī. Open the front cover and remove the drum and toner assembly. Clean the corona wire inside the drum unit.Ī.
If the error message continues to appear and you already repeated the reset steps, go to step 3.ģ.
Make sure 'Accepted' appears after selecting 1. If the error message continues to appear, repeat step 2 to ensure the steps were completed correctly. Once the display shows 'Cover is Open', go ahead and close the front cover. The machine's display will briefly say Accepted, followed by 'Cover is Open'.ĭ. The machine's display will say 'Replace Drum' with options of 1 for YES and 2 for NO.Ĭ. With the cover still open, press OPTIONS. Perform the following steps to reset the drum:ī. If the instructions are not completed or followed properly, it will cause the Drum Error message to appear. There are instructions provided with the replacement drum for resetting the drum life when a new drum is installed. If you have NOT used the new drum because the error message is on the machine's display, it appears the new drum was not reset properly. If you used the new drum and then the error re-appeared after some printing, refer to: ''DRUM ERROR' message' When the drum unit was installed, were you able to print using the new drum and then the error re-appeared after some printing OR you have NOT used the new drum at all because the error message is on the machine's display?
Our website offer free shipping on all the orders above $49 and it cost you just $5.95 shipping free for the orders below $49.1. Our website also sells printer supplies, smartphone accessories and office supplies of good quality and fair prices. If you want to buy Brother printer or the printers of other brands, welcome to our website 123ink.ca. If it does not work for some particular printer model, please refer to the official user guide. You should pay attention that the above instruction is for the universal Brother drum unit. 1.Make sure that the machine is turned on.ģ.Press and hold “Clear/Back” button until you see: “Replace Drum?”įor some printer models, press “OK” or “Options” button.Ĥ.Press the “Up arrow” key or “1” to reset the drum counter.ĥ.When the LCD shows Accepted, close the front cover.ģ.Press and hold the “Go” button for until all the LEDs light up.Ĥ.Once all the LEDs are lit, release the “Go” button.ĥ.Close the front cover.
0 kommentar(er)
